Skip menu
Sprache | Language:

Con­vey­or technology for the print and paper industry 

The print indus­try occu­pies a posi­tion of great impor­tance in any mod­ern indus­tri­al soci­ety. Even in the age of the Inter­net, smart­phone, SMS and email com­mu­ni­ca­tion, dai­ly news­pa­pers still account for a major share of trans­mit­ting news of all kinds. The pro­duc­tion of books, all our works of lit­er­a­ture with all the sub­jects they cov­er, would be incon­ceiv­able with­out the print indus­try. Whole stacks of paper are moved on con­vey­or facil­i­ties in a lin­ear direc­tion as well as along curved sec­tions as required. Some­times, these stacks also have to be turned over while being moved. If con­vey­ing along curved sec­tions is required, con­i­cal rollers are used. With their help, curves with vari­able curve radii can also be nego­ti­at­ed with­in cer­tain limits.

Print­ing com­pa­ny con­vey­or belt with spe­cial challenges

A mid-sized com­pa­ny man­u­fac­tures pile turn­ers for the print indus­try and requires suit­able rollers for a feed device. These should be low-main­te­nance and of a sta­ble design. The spe­cial chal­lenges here were due to a non-stop process dur­ing heavy load appli­ca­tion, which made the use of pre­ci­sion bear­ings nec­es­sary. An addi­tion­al issue was hav­ing to deal with dust occur­ring dur­ing oper­a­tions. This con­tract required a com­plete replace­ment of the con­vey­or sys­tem with the feed­er to be refit­ted to our rollers. Suit­able rollers here are the spe­cial series 45 rollers, a weld­ed ver­sion with dou­ble gear dri­ve Z=12. The tube dimen­sions for this ver­sion are 63.52.9 mm, with axle design secured and SW. The bear­ing is sealed on both sides as a 2RS ver­sion. The roller bot­toms were pro­duced as a recessed ver­sion and thus cor­re­spond to series 25. This project was car­ried out using prod­ucts from our stan­dard range with addi­tion­al vari­a­tions. Fol­low­ing coor­di­na­tion and expla­na­tion by the tech­ni­cal depart­ment, work on the project was start­ed. The time required for the entire con­ver­sion of the con­vey­or sys­tem was approx. six weeks.

Rollers for print­ing com­pa­ny con­vey­or belt

Series 45 rollers with dual gear dri­ves are suit­able for con­vey­ing medi­um to heavy loads. The load capac­i­ty of this series is a max­i­mum 100 kg per roller.

In addi­tion to the SW (stands for span­ner width) axle design used in this project, oth­er axle ver­sions are available

  • IGM (with inter­nal thread),
  • M (exter­nal thread with hex nut),
  • AGM (exter­nal thread),
  • GL (straight ver­sion with­out thread),
  • FA (spring version).

Each axle ver­sion has its own fea­tures and advan­tages. Which of these is ulti­mate­ly the most suit­able and select­ed depends on the par­tic­u­lar appli­ca­tion involved.

We do not car­ry out any main­te­nance work on our rollers and do not offer our cus­tomers any ser­vice con­tracts either. We clas­si­fy rollers as parts sub­ject to wear and tear. In return, we offer our cus­tomers pre­ven­ta­tive ware­hous­ing of rollers to ensure their sup­plies. This assures the cus­tomer that there will be no long-term pro­duc­tion down­times due to dis­rup­tions, which would be caused by defec­tive rollers.

Con­clu­sion

Many of our cus­tomers have been impressed by the qual­i­ty of our rollers, as they always result in an increase in effi­cien­cy and per­for­mance in the pro­duc­tion process. In some cas­es, when exe­cut­ing a cus­tomer order, it is not nec­es­sary to replace an exist­ing con­vey­or sys­tem com­plete­ly. Some­times, installing our rollers in the exist­ing con­vey­or sys­tem is suf­fi­cient. This kind of solu­tion is of course espe­cial­ly cus­tomer-friend­ly, as the cost involved is reduced con­sid­er­ably. It is also in our inter­est, of course, to cater to our customer’s requests as far as pos­si­ble. As such, being as flex­i­ble as pos­si­ble in regard to the entire con­vey­or sys­tem plays an essen­tial role. The con­vey­or sys­tem often has to be usable for all kinds of dif­fer­ent prod­ucts, a con­cern that is becom­ing increas­ing­ly important.

At TRA­POROL, we pro­vide our cus­tomers with per­for­mance to the fullest extent. This includes quot­ing, project man­age­ment, pro­cure­ment, and pre­ven­ta­tive ware­hous­ing of quan­ti­ties request­ed by cus­tomers. These quan­ti­ties ensure prompt deliv­er­ies of replace­ment rollers and thus pre­vent pos­si­ble pro­duc­tion loss­es due to con­vey­or sys­tem down­times. Our cus­tomer-friend­ly ser­vice also includes deliv­ery arrange­ments with for­ward­ing agents and spe­cial pack­ag­ing to avoid trans­port dam­age. Our com­pre­hen­sive deliv­ery ser­vice con­tributes sig­nif­i­cant­ly to our suc­cess­ful busi­ness relationships.

{ {messe.title }} Logo

Visit us from 6.–8. Nov at the FMB 2019 in Bad Salzuflen.

Stand D33

Cookies

To ensure the best experience for you on our website, we use cookies. We have updated our privacy policy as well. Learn more